PCF85063 Example
This example shows how to use the espp::Pcf85063 component to initialize and
communicate with the PCF85063 RTC.
How to use example
Hardware Required
This example is designed to run on a custom board with a PCF85063 RTC. You will need to configure the I2C pins for your specific hardware.
Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
idf.py -p PORT flash monitor
(Replace PORT with the name of the serial port to use.)
(To exit the serial monitor, type Ctrl-].)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.