FTP Example

This example showcases the use of the FtpServer from the ftp component.

How to use example

Configure the project

idf.py menuconfig

You’ll need to configure the WiFi information that you wish the ESP to connect to. You can optionally configure the FTP server port if you wish to use a non-standard port.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output