CHSC6X Example
This example shows how to use the CHSC6X touch controller with ESP32. It is designed to run on a Seeed Studio Round Display.
How to use example
Hardware Required
Seeed Studio Round Display (or any other dev board with a CHSC6X touch controller)
Configure
idf.py menuconfig
Set the hardware configuration for the example.
Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
idf.py -p PORT flash monitor
(Replace PORT with the name of the serial port to use.)
(To exit the serial monitor, type Ctrl-].)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.