CST816 Example
This example shows how to use the CST816 touch controller with ESP32. It is designed to run on a Matouch Rotary Display.
How to use example
Hardware Required
The Matouch Rotary Display is required for this example.
If you have other hardware with CST816, you can run menuconfig, and select the
HARDWARE_CUSTOM option. and then select which pins are connected to the
CST816.
Configure
idf.py menuconfig
Set the hardware configuration for the example.
Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
idf.py -p PORT flash monitor
(Replace PORT with the name of the serial port to use.)
(To exit the serial monitor, type Ctrl-].)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.