Google Fast Pair Service (GFPS) Service Example
This example shows how to use the espp::GfpsService class together with the
espp::BleGattServer class to create and manage a BLE GATT server that provides
support for Google Fast Pair Service (GFPS) using the
nearby/embedded framework.
NOTE: this example uses a pre-registered device. If you want to register your own device(s), you must do that on the nearby/devices dashboard.
How to use example
Hardware Required
This example should run on any ESP32s3 development board as it requires no peripheral connections.
Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
idf.py -p PORT flash monitor
(Replace PORT with the name of the serial port to use.)
(To exit the serial monitor, type Ctrl-].)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.