RX8130CE Example
This example shows how to use the RX8130CE RTC driver to set and get the time.
How to use example
Hardware Required
This example can be run on any ESP32-based board, the RX8130CE is connected to the ESP32 via I2C.
You can use menuconfig to configure the I2C pins and frequency used by the example.
Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
idf.py -p PORT flash monitor
(Replace PORT with the name of the serial port to use.)
(To exit the serial monitor, type Ctrl-].)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.