Joystick APIs#

Joystick#

The Joystick class provides a wrapper around a 2-axis analog joystick, with an associated reader function for grabbing the raw values. When the joystick update() is called, the raw values are mapped into the range [-1,1] for each axis according to the configuration provided.

Code examples for the task API are provided in the joystick example folder.

API Reference#

Header File#

Classes#

class Joystick : public espp::BaseComponent#

2-axis Joystick with axis mapping / calibration.

Basic Circular and Rectangular Joystick Example#

    float min = 0;
    float max = 255;
    float center = 127;
    float deadband_percent = 0.1f;
    float deadband = deadband_percent * (max - min);

    // circular joystick
    espp::Joystick js1({
        .x_calibration = {.center = center, .minimum = min, .maximum = max},
        .y_calibration = {.center = center, .minimum = min, .maximum = max},
        .type = espp::Joystick::Type::CIRCULAR,
        .center_deadzone_radius = deadband_percent,
        .range_deadzone = deadband_percent,
    });
    // square joystick (for comparison)
    espp::Joystick js2({
        .x_calibration = {.center = center,
                          .center_deadband = deadband,
                          .minimum = min,
                          .maximum = max,
                          .range_deadband = deadband},
        .y_calibration = {.center = center,
                          .center_deadband = deadband,
                          .minimum = min,
                          .maximum = max,
                          .range_deadband = deadband},
    });
    // now make a loop where we update the raw valuse and print out the joystick values
    fmt::print("raw x, raw y, js1 x, js1 y, js2 x, js2 y\n");
    for (float x = min - 10.0f; x <= max + 10.0f; x += 10.0f) {
      for (float y = min - 10.0f; y <= max + 10.0f; y += 10.0f) {
        js1.update(x, y);
        js2.update(x, y);
        fmt::print("{}, {}, {}, {}, {}, {}\n", x, y, js1.x(), js1.y(), js2.x(), js2.y());
      }
    }

ADC Joystick Example#

    static constexpr adc_unit_t ADC_UNIT = CONFIG_EXAMPLE_ADC_UNIT == 1 ? ADC_UNIT_1 : ADC_UNIT_2;
    static constexpr adc_channel_t ADC_CHANNEL_X = (adc_channel_t)CONFIG_EXAMPLE_ADC_CHANNEL_X;
    static constexpr adc_channel_t ADC_CHANNEL_Y = (adc_channel_t)CONFIG_EXAMPLE_ADC_CHANNEL_Y;

    std::vector<espp::AdcConfig> channels{
        {.unit = ADC_UNIT, .channel = ADC_CHANNEL_X, .attenuation = ADC_ATTEN_DB_12},
        {.unit = ADC_UNIT, .channel = ADC_CHANNEL_Y, .attenuation = ADC_ATTEN_DB_12}};
    espp::OneshotAdc adc({
        .unit = ADC_UNIT_2,
        .channels = channels,
    });
    auto read_joystick = [&adc, &channels](float *x, float *y) -> bool {
      // this will be in mv
      auto maybe_x_mv = adc.read_mv(channels[0]);
      auto maybe_y_mv = adc.read_mv(channels[1]);
      if (maybe_x_mv.has_value() && maybe_y_mv.has_value()) {
        auto x_mv = maybe_x_mv.value();
        auto y_mv = maybe_y_mv.value();
        *x = (float)(x_mv);
        *y = (float)(y_mv);
        return true;
      }
      return false;
    };
    espp::Joystick js1({
        // convert [0, 3300]mV to approximately [-1.0f, 1.0f]
        .x_calibration =
            {.center = 1700.0f, .center_deadband = 100.0f, .minimum = 0.0f, .maximum = 3300.0f},
        .y_calibration =
            {.center = 1700.0f, .center_deadband = 100.0f, .minimum = 0.0f, .maximum = 3300.0f},
        .get_values = read_joystick,
    });
    espp::Joystick js2({
        // convert [0, 3300]mV to approximately [-1.0f, 1.0f]
        .x_calibration =
            {.center = 1700.0f, .center_deadband = 0.0f, .minimum = 0.0f, .maximum = 3300.0f},
        .y_calibration =
            {.center = 1700.0f, .center_deadband = 0.0f, .minimum = 0.0f, .maximum = 3300.0f},
        .type = espp::Joystick::Type::CIRCULAR,
        .center_deadzone_radius = 0.1f,
        .get_values = read_joystick,
    });
    auto task_fn = [&js1, &js2](std::mutex &m, std::condition_variable &cv) {
      js1.update();
      js2.update();
      fmt::print("{}, {}\n", js1, js2);
      // NOTE: sleeping in this way allows the sleep to exit early when the
      // task is being stopped / destroyed
      {
        std::unique_lock<std::mutex> lk(m);
        cv.wait_for(lk, 500ms);
      }
      // don't want to stop the task
      return false;
    };
    auto task = espp::Task({.callback = task_fn,
                            .task_config = {.name = "Joystick"},
                            .log_level = espp::Logger::Verbosity::INFO});
    fmt::print("js1 x, js1 y, js2 x, js2 y\n");
    task.start();

Public Types

enum class Type#

Type of the joystick.

Note

When using a Type::CIRCULAR joystick, it’s recommended to set the individual x/y calibration deadzones to be 0 and to only use the deadzone_radius field to set the deadzone around the center.

Values:

enumerator RECTANGULAR#

The default type of joystick. Uses the rangemappers for each axis (to convert raw values from input range to be [-1,1]) independently which results in x/y deadzones and output that are rectangular.

enumerator CIRCULAR#

The joystick is configured to have a circular output. This means that the x/y < deadzones are circular around the input and range and the output is clamped to be on or within the unit circle.

typedef std::function<bool(float *x, float *y)> get_values_fn#

function for gettin x/y values for the joystick.

Param x:

Pointer to the x value. Function should fill this variable with the latest reading.

Param y:

Pointer to the y value. Function should fill this variable with the latest reading.

Return:

True if the values were able to be retrieved, false otherwise.

Public Functions

explicit Joystick(const espp::Joystick::Config &config)#

Initalize the joystick using the provided configuration.

Parameters:

config – Config structure with initialization information.

void set_type(espp::Joystick::Type type, float radius = 0, float range_deadzone = 0)#

Set the type of the joystick.

See also

set_calibration

Note

If the Joystick is Type::CIRCULAR, the actual calibrations that are saved into the joystick will have 0 deadzone around the center value and range values, so that center and range deadzones are actually applied on the vector value instead of on the individual axes independently.

Parameters:
  • type – The Type of the joystick.

  • radius – Optional radius parameter used when type is Type::CIRCULAR. When the magnitude of the joystick’s mapped position vector is less than this value, the vector is set to (0,0).

  • range_deadzone – Optional deadzone around the edge of the unit circle when type is Type::CIRCULAR. This scales the output so that the output appears to have magnitude 1 (meaning it appears to be on the edge of the unit circle) if the magnitude of the mapped position vector is greater than 1-range_deadzone. Example: if the range deadzone is 0.1, then the output will be scaled so that the magnitude of the output is 1 if the magnitude of the mapped position vector is greater than 0.9.

espp::Joystick::Type type() const#

Get the type of the joystick.

Returns:

The Type of the joystick.

void set_center_deadzone_radius(float radius)#

Sets the center deadzone radius.

Note

Radius is only applied when deadzone is Deadzone::CIRCULAR.

Parameters:

radius – Optional radius parameter used when deadzone is Deadzone::CIRCULAR. When the magnitude of the joystick’s mapped position vector is less than this value, the vector is set to (0,0).

float center_deadzone_radius() const#

Get the center deadzone radius.

Returns:

The center deadzone radius.

void set_range_deadzone(float range_deadzone)#

Sets the range deadzone.

Note

Range deadzone is only applied when deadzone is Deadzone::CIRCULAR.

Parameters:

range_deadzone – Optional deadzone around the edge of the unit circle when deadzone is Deadzone::CIRCULAR. This scales the output so that the output appears to have magnitude 1 (meaning it appears to be on the edge of the unit circle) if the magnitude of the mapped position vector is greater than 1-range_deadzone. Example: if the range deadzone is 0.1, then the output will be scaled so that the magnitude of the output is 1 if the magnitude of the mapped position vector is greater than 0.9.

float range_deadzone() const#

Get the range deadzone.

Returns:

The range deadzone.

void set_calibration(const espp::FloatRangeMapper::Config &x_calibration, const espp::FloatRangeMapper::Config &y_calibration, float center_deadzone_radius = 0, float range_deadzone = 0)#

Update the x and y axis mapping.

Note

If the Joystick is Type::CIRCULAR, the actual calibrations that are saved into the joystick will have 0 deadzone around the center and range values, so that center and range deadzones are actually applied on the vector value.

Parameters:
  • x_calibration – New x-axis range mapping configuration to use.

  • y_calibration – New y-axis range mapping configuration to use.

  • center_deadzone_radius – The radius of the unit circle’s deadzone [0, 1.0f] around the center, only used when the joystick is configured as Type::CIRCULAR.

  • range_deadzone – Optional deadzone around the edge of the unit circle when type is Type::CIRCULAR. This scales the output so that the output appears to have magnitude 1 (meaning it appears to be on the edge of the unit circle) if the magnitude of the mapped position vector is greater than 1-range_deadzone. Example: if the range deadzone is 0.1, then the output will be scaled so that the magnitude of the output is 1 if the magnitude of the mapped position vector is greater than 0.9.

void update()#

Read the raw values and use the calibration data to update the position.

Note

Requires that the get_values_ function is set.

void update(float raw_x, float raw_y)#

Update the joystick’s position using the provided raw x and y values.

Note

This function is useful when you have the raw values and don’t want to use the get_values_ function.

Parameters:
  • raw_x – The raw x-axis value.

  • raw_y – The raw y-axis value.

float x() const#

Get the most recently updated x axis calibrated position.

Returns:

The most recent x-axis position (from when update() was last called).

float y() const#

Get the most recently updated y axis calibrated position.

Returns:

The most recent y-axis position (from when update() was last called).

const espp::Vector2f &position() const#

Get the most recently updated calibrated position.

Note

The returned reference is valid as long as the Joystick object is alive.

Returns:

The most recent position (from when update() was last called).

const espp::Vector2f &raw() const#

Get the most recently updated raw / uncalibrated readings. This function is useful for externally performing a calibration routine and creating updated calibration / mapper configuration structures.

Note

The returned reference is valid as long as the Joystick object is alive.

Returns:

The most recent raw measurements (from when update() was last called).

inline const std::string &get_name() const#

Get the name of the component

Note

This is the tag of the logger

Returns:

A const reference to the name of the component

template<typename T = void>
inline void set_log_tag(const std::string_view&)#

Not available: the tag is fixed at construction (pass it to the constructor). Enable CONFIG_ESPP_LOGGER_MUTABLE_TAG (menuconfig: ESPP Logger -> Mutable tag) to change it afterwards.

inline espp::Logger::Verbosity get_log_level() const#

Get the log level for the logger

Returns:

The verbosity level of the logger

inline void set_log_level(espp::Logger::Verbosity level)#

Set the log level for the logger

Parameters:

level – The verbosity level to use for the logger

inline void set_log_verbosity(espp::Logger::Verbosity level)#

Set the log verbosity for the logger

See also

set_log_level

Note

This is a convenience method that calls set_log_level

Parameters:

level – The verbosity level to use for the logger

inline espp::Logger::Verbosity get_log_verbosity() const#

Get the log verbosity for the logger

See also

get_log_level

Note

This is a convenience method that calls get_log_level

Returns:

The verbosity level of the logger

inline void set_log_rate_limit(std::chrono::duration<float> rate_limit)#

Set the rate limit for the logger

Note

Only calls to the logger that have _rate_limit suffix will be rate limited

Parameters:

rate_limit – The rate limit to use for the logger

struct Config#

Configuration structure for the joystick.

Public Members

espp::FloatRangeMapper::Config x_calibration#

Configuration for the x axis.

espp::FloatRangeMapper::Config y_calibration#

Configuration for the y axis.

espp::Joystick::Type type = {espp::Joystick::Type::RECTANGULAR}#

The type of the joystick. See Type enum for more information.

float center_deadzone_radius{0}#

The radius of the unit circle’s deadzone [0, 1.0f] around the center, only used when the joystick is configured as Type::CIRCULAR.

float range_deadzone = {0}#

The deadzone around the edge of the unit circle, only used when the joystick is configured as Type::CIRCULAR. This scales the output so that the output appears to have magnitude 1 (meaning it appears to be on the edge of the unit circle) when the joystick value magnitude is within the range [1-range_deadzone, 1].

espp::Joystick::get_values_fn get_values = {nullptr}#

Function to retrieve the latest unmapped joystick values. Required if you want to use update(), unused if you call update(float raw_x, floatraw_y).

espp::Logger::Verbosity log_level = {espp::Logger::Verbosity::WARN}#

Verbosity for the Joystick logger_.