Waveshare ESP32-S3-LCD-1.47 Example

This example shows how to use the espp::WsS3Lcd147 hardware abstraction component initialize the components on the Waveshare ESP32-S3-LCD-1.47.

It initializes the display, button, and RGB LED subsystems.

How to use example

Hardware Required

This example is designed to run on the Waveshare ESP32-S3-LCD-1.47 dev board which has:

WiFi / BLE
uSD card
Color TFT LCD (ST7789, 172x320 1.47” IPS LCD)
Boot Button
RGB LED

Waveshare ESP32-S3-LCD-1.47 Pin Configuration

LCD Pin	ESP32S3 IO Pin Number
MOSI	45
SCLK	40
CS	42
DC	41
Reset	39
Backlight	48

TF / uSD Card Pin	ESP32S3 IO Pin Number
D0	16
D1	18
D2	17
D3	21
CLK	14
CMD	15

Misc	ESP32S3 IO Pin Number
RGB LED	38

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (350) main_task: Calling app_main()
[WsS3Lcd147 Example/I][0.026]: Starting example!
[WsS3Lcd147/I][0.032]: Initializing LCD...
I (364) gpio: GPIO[39]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (372) gpio: GPIO[41]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
[WsS3Lcd147/I][0.454]: Initializing display with pixel buffer size: 16000 bytes
W (782) ledc: the binded timer can't keep alive in sleep
[WsS3Lcd147/I][0.459]: Initializing SD card
I (788) gpio: GPIO[14]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (797) gpio: GPIO[15]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (805) gpio: GPIO[16]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (813) gpio: GPIO[18]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (822) gpio: GPIO[17]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (830) gpio: GPIO[21]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (880) gpio: GPIO[21]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
[WsS3Lcd147/I][0.561]: Filesystem mounted
Name: 00000
Type: SDHC
Speed: 40.00 MHz (limit: 40.00 MHz)
Size: 30543MB
CSD: ver=2, sector_size=512, capacity=62552064 read_bl_len=9
SSR: bus_width=4
[WsS3Lcd147/I][0.568]: Initializing LED
[WsS3Lcd147 Example/I][0.573]: Initializing the button
[WsS3Lcd147/I][0.578]: Initializing button
I (910) gpio: GPIO[0]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:3
Setting rotation to 1
Setting rotation to 2
Setting rotation to 3
Setting rotation to 0