T-Deck Example
This example shows how to use the espp::TDeck hardware abstraction component
initialize the components on the LilyGo T-Deck.
It initializes the touch, display, and t-keyboard subsystems. It reads the touchpad state and each time you touch the screen it uses LVGL to draw a circle where you touch. If you press the home button on the display, it will clear the circles.
https://github.com/user-attachments/assets/5d7e7086-fc2c-4477-8948-07b5bab3e51f
https://github.com/esp-cpp/espp/assets/213467/dc476c3d-dd9e-4b65-8c2d-9eda3ff3f33f
How to use example
Hardware Required
This example is designed to run on the LilyGo T-Deck.
Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
idf.py -p PORT flash monitor
(Replace PORT with the name of the serial port to use.)
(To exit the serial monitor, type Ctrl-].)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.