RMT Example

This example shows the use of the espp::Rmt and espp::RmtEncoder classes of the rmt component for driving an LED.

How to use example

Hardware Required

This example is designed to be run on a TinyS3 to control its WS2812 LED using the ESP RMT peripheral.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

image

https://github.com/esp-cpp/espp/assets/213467/321cb604-8ecb-40d6-9489-8e995c43f5b9