ESP32-TIMER-CAM Example
This example shows how to use the espp::EspTimerCam hardware abstraction
component to automatically detect and initialize components on the
ESP32-TimerCam.
It initializes the LED, RTC, I2C, and ADC.
https://github.com/user-attachments/assets/b0c0eb28-0ce1-466d-b6e5-debbc0e7f3f6
How to use example
Hardware Required
This example is designed to run on the ESP32-TimerCam.
Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
idf.py -p PORT -b 1500000 flash monitor
(Replace PORT with the name of the serial port to use.)
Note: the baudrate for the ESP32 TimerCam cannot go up to 2 MBaud, so 1.5MBaud is recommended.
(To exit the serial monitor, type Ctrl-].)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.