Plug in the emulator and connect
Connect over the USB-C port to see what the emulator is doing, browse and start games, watch and play the screen, move files to and from the SD card, change the settings and inspect the system.
Nothing to install: the page talks to the device's link interface (WebUSB). Close
emulink first, only one program can use the link at a time.
Performance
- Frames shown
- —
- Frames dropped
- —
- Game frames
- —
Memory
Device
- Firmware
- —
- Built
- —
- Partition
- —
- Uptime
- —
- Last reset
- —
SD card
—
As a USB drive the card belongs to the PC: eject it there before taking it back.
Last crash
Keyboard (on this tab): arrows, Z = A, X = B, A = X, S = Y, Q / W = L / R, Enter = Start, Shift = Select.
Save states
| Name | Size |
|---|
Launcher settings
Changed here, shown in the launcher right away and saved to the SD card a moment later.
System
Firmware update
The emulator restarts into its updater, and the espp OTA console opens in a new tab to send the new firmware (build/<app>.bin).
Restart
Download mode is for idf.py flash over USB (the updater, a new partition table...).
Services on the link
| Module | Protocol |
|---|
The generic services have their own espp web apps; opening one hands the device over to it. The espp Device Hub lists them all.
The console is the device's CDC serial port (Web Serial), separate from the link: pick the port named after the emulator's console.